Hardware & Making

On bendy inflatables and travelling techno

Or, making hackercamp installations for cheap
Meitner
Jarkman
I’ve made several interactive hackercamp installations over the years. I’ll talk about how they work, how they were made (generally very cheaply), about how people found ways to interact with them, and about what I’ve learned about experience design from them. And about where you can find the source code, obviously.

Additional information

Type lecture
Language English

More sessions

8/21/19
Hardware & Making
Lukas "cube" Hannen
Meitner
Die CCC-family geht campen, das heisst der Knoten wird ausnahmsweise vom abstrakten mathematischen Konzept zur ganz realen Anwendung von Seil und Schnur. Was da alles schiefgehen kann, wo Knoten herkommen und wer sie verwendet wird hier kurz und knackig bearbeitet.
8/21/19
Hardware & Making
Curie
8/21/19
Hardware & Making
Trammell Hudson
Curie
<a href="https://github.com/osresearch/spispy">spispy</a> is an open source hardware tool for emulating SPI flash chips that makes firmware development and boot security research easier. In this talk we'll discuss the challenges of interfacing on the SPI bus and emulating SPI devices, as well as demonstrate how to use it quickly debug issues with coreboot and how we used spispy to discover a critical class of TOCTOU vulnerabilities in secure boot systems like Intel BootGuard.
8/21/19
Hardware & Making
LaForge
Curie
It's tempting to buy a SDR device like a LimeSDR or USRP family member in the expectation of operating any wireless communications system out there from pure software. In reality, however, the SDR board is really only one building block. Know the limitations and constraints of your SDR board and what you need around it to build a proper transceiver.
8/22/19
Hardware & Making
Paul Gardner-Stephen
Curie
Removing the barriers to making network independent mobile communications.
8/22/19
Hardware & Making
Nicole Faerber
Curie
Motivation and challenges building a mobile phone that respects your freedom, privacy and digital rights - and is hackable. This talk will present a summary of a two year journey, which is still ongoing.
8/22/19
Hardware & Making
oshie
Curie
Mobiltelefone hinterlassen aufgrund ihrer Funkaktivität in der Umgebung vielfältige Spuren, die von entsprechendem passiven Equipment aufgespürt und verarbeitet werden kann. Doch um tiefer in die Kommunikation zu schauen, braucht es aktive Netzwerkomponenten – sogenannte IMSI-Catcher oder Stingrays, die den Kontakt zu ihren Zielen direkt suchen und Informationen austauschen. Doch wenn sich solche hinterhältigen Basisstationen auf die Lauer legen, müssen sie sich zu Erkennen geben – und ...