Open Hardware and CAD/CAM
FreeCAD - state of affairs
<p>This is a generic state-of-affairs talk about <a href="https://freecad.org">FreeCAD</a>, a manner for people to catch up with all that has happened in the FreeCAD universe since last FOSDEM. We will show what is new in FreeCAD itself, what is cooking in the development kitchens, and a glimpse over community happenings and what the <a href="https://fpa.freecad.org">FPA</a>, the non-profit behind the project, has been doing.</p>
Additional information
| Live Stream | https://live.fosdem.org/watch/h1309 |
|---|---|
| Type | devroom |
| Language | English |
More sessions
| 2/1/26 |
<p>Introduction to the Open Hardware and CAD/CAM Devroom</p>
|
| 2/1/26 |
<p>Gnucap is a free/libre versatile and modern, modular, analog and mixed-signal simulator. Verilog-AMS is a standardised behavioural language for analog and mixed-signal systems based on the IEEE 1364-2005 industry standard, commonly known as Verilog. Verilog and its extensions offer a portable representation for circuits and device models consistent across application domains. With funding from NLnet we are pushing for standardisation in an otherwise heterogeneous environment of traditional ...
|
| 2/1/26 |
<p>PCB design often require a lot of exchange with mechanical CAD softwares especially when the mechanical integration has a lot of constraints. Today, most of the time, the ECAD/MCAD collaboration is done through STEP, DXF, SVG, or other file formats, and usually a combination of several of them.</p> <p>The IDX protocols aims at using a single protocol, that will keep tracks of the changes incrementally as the design goes on, and even use a shared library of components, bridging the gap between ...
|
| 2/1/26 |
<p>Just about a year ago I started on my 3rd attempt at building a new FreeCAD workbench to provide bidirectional syncing between FreeCAD and KiCAD with a focus on multiple boards and minimal user interaction. With KiCAD v9 being release with it's new long-term API it made sense to try again.</p> <p>This is a followup to my KiCon 2025 which I will detail some of the progress that has been made since, and impressions of the KiCAD API as I've used it more.</p>
|
| 2/1/26 |
<p>Dune 3D is parametric 3D CAD application I started developing about 2½ years ago. It combines the solver from Solvespace with OpenCASCADE for a geometry kernel under a modern Gtk4-based user interface.</p> <p>In this talk, I'll go into how the project evolved in the past two years as well as what's ahead.</p> <p>https://dune3d.org/</p>
|
| 2/1/26 |
<p>There are thousands of different IoT devices on the market. To control them, you currently have a few options:</p> <ol> <li> <p>Use the vendor’s cloud service. This approach has many problems: there is no interoperability between different vendors, so you end up installing 10 different cloud apps for 10 different devices; there are privacy concerns; and anything beyond the basics usually requires paid features.</p> </li> <li> <p>Use an open-source platform such as Home Assistant, OpenHAB, ...
|
| 2/1/26 |
<p>LibrePCB 2.0 is an exciting milestone of our mission to provide an easy-to-use, modern, Open-Source PCB design software. With its completely redesigned user interface and new design concepts, the productivity and general user experience have been significantly improved. In this talk I will demonstrate the capabilities and advantages of LibrePCB 2.0, including other new features and improvements beyond its new UI. Also you will get an update about other aspects of the LibrePCB project, like ...
|
