Computer Aided Modeling and Design

ngspice - current status and future developments

D.cad
Holger Vogt
<p>After a short introduction to the ngspice circuit simulator the first part of the talk will present some new features available in ngspice-36. Among them are SVG plotting capability, acknowledging RKM notation (e.g. 4k7 for 4.7 KOhm resistance), new and improved convergence methods when calculation the operating point, and many others.</p> <p>The second part of the talk discusses some new features under development or still under discussion, like XSPICE memory management improvements, adding BSIMCMG model for FinFETs, adding IBIS capability (together with KiCad and sparselizard), and S parameter intgration. A lot of discussions is going on among FOSS simulator developers and users about better Verilog-A support.</p>

Additional information

Type devroom

More sessions

2/5/22
Computer Aided Modeling and Design
Fabien Corona
D.cad
<p>Faster computations, faster communication speeds, faster everything. Today electronics can use data rates of several gigabits per second. At such speed wires and tracks are far from being perfect, bugs and glitches may arise because of them. Even low-speed designs are not safe and can encounter high-speed problems because they use high-speed capable chips.</p> <p>While the electronic CAD software KiCad has the tools to design high-speed boards, there is no tool to validate them. The usual way ...
2/5/22
Computer Aided Modeling and Design
D.cad
<p>This will be joint presentation between realthunder and officinerobotica. The talk will first give a brief introduction of FreeCAD and its Link Branch, and then proceed to talk about its development in the past year with reference to the talk in FOSDEM21. New features will be presented by walking through the construction of a CAD model using FreeCAD. The talk will finish by highlighting new features in development and the road map ahead.</p>
2/5/22
Computer Aided Modeling and Design
Urban Bruhin
D.cad
<p>A short overview about the progress and the current state of the LibrePCB project.</p>
2/5/22
Computer Aided Modeling and Design
D.cad
<p>Update on the KiCad project including recent events, version 6 stable release, and what to expect during version 7 development.</p>
2/5/22
Computer Aided Modeling and Design
Yorik van Havre
D.cad
<p>BIM (Building Information Modeling) is a paradigm for 3D CAD models made for Architecture, Engineering and Construction (AEC). Long a closed, proprietary garden, it becomes more and more an open, hackable world thanks to several Free and Open-Source tools and formats.</p> <p>This talk will try to illustrate how rich that world has become when your tinkering, hacking, coding itch starts to scratch...</p>
2/5/22
Computer Aided Modeling and Design
D.cad
<p>Open Cascade Technology (OCCT) is a framework for B-Rep modeling. The lecture presents a technical update from the previous talk (at FOSDEM 2021). This year we also introduce our OCCT's Community Manager who will highlight community-related activities that happened during 2021.</p>
2/5/22
Computer Aided Modeling and Design
Alexandre Halbach
D.cad
<p>This talk shows the features added to Sparselizard in 2021</p>