Session
Programm CCCamp 2019
Hardware & Making

c3Power Monitoring CCCamp 19

Strom in Bits und Bytes visualisiert
Infastructure Review des Camp 2019 Stromnetz aus Sicht des auf der GPN in der Theorie vorgestellten Low Cost Power Monitoring. Aufbau des Monitoring-Netzes, Inbetriebname und Ergebnisse von Tag -1 bis Tag 4

Wie verhält sich das Netz von c3Power auf dem Camp 2019 zu den verschiedene Tageszeiten, wie sieht die Auswertung von z.B. Lastverteilung, Netzoberwellen, Fehlerrate aus. Visualisierung der Daten in Grafana, Server Infrastruktur. Do:s and don't:s vom Aufbau der Hardware, Betrieb bei 50 Grad plus und 10 cm Wasserstand im Freien. Stabiltät des Campnetzes in den ersten 4 Tagen. Integration ins DMR Funknetz über MMDVM Hotspots zum absenden der Fehlermeldungen als DMR SMS. Abhandeln der Störmeldungen. Impressionen vom c3power Team während des Events.

Additional information

Type lecture
Language German

More sessions

8/21/19
Hardware & Making
Lukas "cube" Hannen
Meitner
Die CCC-family geht campen, das heisst der Knoten wird ausnahmsweise vom abstrakten mathematischen Konzept zur ganz realen Anwendung von Seil und Schnur. Was da alles schiefgehen kann, wo Knoten herkommen und wer sie verwendet wird hier kurz und knackig bearbeitet.
8/21/19
Hardware & Making
Curie
8/21/19
Hardware & Making
Trammell Hudson
Curie
<a href="https://github.com/osresearch/spispy">spispy</a> is an open source hardware tool for emulating SPI flash chips that makes firmware development and boot security research easier. In this talk we'll discuss the challenges of interfacing on the SPI bus and emulating SPI devices, as well as demonstrate how to use it quickly debug issues with coreboot and how we used spispy to discover a critical class of TOCTOU vulnerabilities in secure boot systems like Intel BootGuard.
8/21/19
Hardware & Making
Jarkman
Meitner
I’ve made several interactive hackercamp installations over the years. I’ll talk about how they work, how they were made (generally very cheaply), about how people found ways to interact with them, and about what I’ve learned about experience design from them. And about where you can find the source code, obviously.
8/21/19
Hardware & Making
LaForge
Curie
It's tempting to buy a SDR device like a LimeSDR or USRP family member in the expectation of operating any wireless communications system out there from pure software. In reality, however, the SDR board is really only one building block. Know the limitations and constraints of your SDR board and what you need around it to build a proper transceiver.
8/22/19
Hardware & Making
Paul Gardner-Stephen
Curie
Removing the barriers to making network independent mobile communications.
8/22/19
Hardware & Making
Nicole Faerber
Curie
Motivation and challenges building a mobile phone that respects your freedom, privacy and digital rights - and is hackable. This talk will present a summary of a two year journey, which is still ongoing.