Workshop hacking radio-signals
hacking the 433 MHz radio remote control of your devices at home
Receive, analyse and re-transmit the signals of the radio remote-control of a powerplug
In this workshop, you'll learn how to receive and analyse radio-signals of the 433 MHz remote-control using different tools: gqrx, inspectrum and urh (Univeral Radio Hacker); and also multiple ways to retransmit (read: spoof) these signals yourself.
The workshop requires your own laptop, the 'DragonOS' linux distro and -if you have them- a hardware device like the RTL-SDR dongle, hackRF or simular. (But wo do have some we can provide if you do not have one yourself).
Along the way, you'll learn some things about radio, antennas and signal-processing.
The workshop is about 3 to 4 hours in total.
The workshop is limited to 6 people.
I bring the SDR-SDR dongles for this. (I have about 10 of them)
If you are interested in this workshop:
- Contact me at this email-address: rfhackinghackover@proximus.be
- drop a message in this thread on lemmy: https://infosec.pub/post/238312
(fediverse account required)
For this workshop, you need a laptop at least two free USB slots.
On the software-side there are three options:
- download the image of DragonOS (see link below) and flash it on a USB book-disk.
- download the image of DragonOS (see link below) and use VMware or Virtual-box to boot it.
- If you already have a laptop with linux, install the following programs: gqrx-sdr and inspectrum (via apt) and urh (via snap)
https://sourceforge.net/projects/dragonos-focal/
Additional information
| Type | Workshop |
|---|---|
| Language | English |
More sessions
| 7/14/23 |
Goldschmiedeworkshop
|
| 7/14/23 |
Wir wollen einen Privacy Workhop (weiter)entwickeln. Wo könnte man das besser machen als da wo die ganzen anderen Privacy-People rum laufen (:
|
| 7/14/23 |
es ist blau, laut, dreckig, mit sirene und schnell
|
| 7/15/23 |
Eigenes kubernetes bauen und betreuen bei hetzner mit Terraform und Helm. Mit Gimmicks und Batterien.
|
| 7/15/23 |
Bondage für Anfänger*innen
|
| 7/15/23 |
Wir programmieren zusammen Spiele für den Gameboy Advance. Das ist nämlich gar nicht so schwierig wie man erwarten würde und macht Spaß (: Am Ende spielen wir die Games dann auch noch auf der echten Hardware!
|
| 7/15/23 |
1. Inspizieren des Schneidwerkzeugs. 2. Vorbereitung des schleifsteins. 3. Schärf-Progression. 4. Finisch. 5. Schleifsteine Reinigen. 6. Schleifriemen anfertigen und preparieren (Bonus). 7. Schleifstein Planen/Abrichten.
|
